Triumph TR6 PI Operation Manual page 359

Removing
I. Remove the rear road spring 64.20.0 I.
2. Remoye the- outer pivot bolt and nut securing the
trailing arm to the mounting bracket.
3.
Remove the two nuts and washers securing the inner
mounting bracket to the chassis ana withdraw the
shim pack.
4.
Detach the trailing arm and outer bracket from the
car.
5. Remove the nut and bolt securing the outer bracket
to the trailing arm.
6. Remove the two nuts, washers and bolts securing the
inner bracket to the chassis and withdraw the bracket
and shim pack. Ensure shim packs are not intermixed.
TRAILING ARM MOUNTING BRACKETS
- Remove and refit
64.35.20
REAR SUSPENSION
Refitting
7. Reverse instructions I to 6. Do not finally tighten the
trailing arm pivot bolts until the car is resting on its
wheels.
Triumph
TR6
Manual.
Part
No. 545277 Issue I 64.35.20