Table of Contents
Advertisement
BODY
4.
Reverse instructions I to 3.
Refitting
Removing
1.
Raise and support the bonnet.
2.
Remove the nut, plain washers and spring washer.
3.
Detach the bonnet stay.
~----
76.16.20
76.16.14
BONNET STAY
- Remove and refit
To ensure positive locking and eliminate free
movement at the closing face, adjust the bonnet catch
as follows:-
I.
Pull back the spring and slacken the locknut at the
base of the shaft.
2.
Using a screwdriver, screw the shaft in or out as
required.
3.
Retighten the locknut.
4.
Check
the
bonnet closing action and
repeat
instructions 1 to 3 if necessary.
-Adjust
BONNET CATCH
Refitting
3.
Reverse instructions 1 and 2.
Removing
1.
Slacken the trunnion bolts and detach the release
cable.
2.
Remove the four bolts and washers securing the lock
to the bulkhead.
BONNET LOCK
- Remove and refit
76.16.21
76.16.14
76.16.21
Triumph TR6 Manual. Part No. 545277 Issue 1
Hide quick links:
Advertisement
Table of Contents
