Triumph TR6 PI Operation Manual page 143

r
"
THROTTLE LINKAGE
(From Engine
No.
eRIE)
- Remove and refit
19.20.07
FUEL SYSTEM PI
Removing
1., Remove the air intake manifold 19.70.01.
2. Disconnect the throttle cable from the linkage.
3. Remove the retaining clip from the vertical link rod.
4. Remove two bolts, plain and spring washers securing
the linkage to the induction manifold.
5. Withdraw the linkage.
Refitting
6. Reverse instructions 4 and 5.
3.8
70. Adjust the vertical link rod so that the brazed-on
7a
washer just touches the butterfly spindle trunnion.
b. The cam lever is in contact with the roller on
the throttle lever.
c. The throttle lever is against its stop.
8. Tighten the vertical link locknuts and refit the
retaining clip.
9. Refit and adjust the throttle cable.
10. Refit the air intake manifold.
IJ ~L"·H
~
Triumph TR6 Manu,aI. Part No. 545277 Issue I
~£VLAND
19.20.07 P.I. Sheet 2