Triumph TR6 PI Operation Manual page 332

STEERING
STEERING WHEEL
- Remove and rent 57.60.01
Service tool S.36OO
Removing
1. Remove the steering wheel and hub from the car
57.60.01.
2. Remove the six bolts and plain washers securing the
st~ering
wheel spokes to the hub.
Refitting
7. Reverse instructions 1 to 6.
When repladng the horn connection brush ensure
that the spring end is entered in the wheel hub. If the
wheel was withdrawn without spline location marks,
set the road' wheels to 'straight ahead' and fit the
steering wheel with the top spokes horiz6ntal.
Removing
1. Remove the steering wheel pad.
2. Prise out the horn push.
3. Withdraw the horn connection brush.
4. Remove the nut and plain washer securing the
steering wheel to the steering mast.
5. Scribe the top of the steering mast and the hub of the
steering wheel to ensure spline re-engagement in
original location.
6. Using Tool S3600, remove the steering wheel.
57.60.02 - Remove and refit
STEERING WHEEL HUB
Refitting
3. Reverse instructions 1 and 2.
Triumph TR6 Manual. Part No. 545277 Issue 2
57.60.01/02
~ t
;~
..
.....•
'"
..
j-<f