SYNCHROMESH GEARBOX
Refitting
5.
Refit the pinion assembly.
6.
Locate and tighten the peg bolt.
7.
Connect the speedometer cable to the gearbox.
Removing
1.
Drive the vehicle onto a ramp and raise the ramp.
2.
Disconnect the speedometer cable from the gearbox.
3.
Unscrew the peg bolt.
4.
Withdraw the pinion assembly.
SPEEDOMETER DRIVE PINION ASSEMBLY
- Remove and refit
SPEEDOMETER DRIVE PINION ASSEMBLY
- Overhaul
37.25.09
37.25.13
1.
Remove the
sp~edometer
pinion assembly 37.25.09.
Dismantling
2.
Withdraw the pinion from the h·ousing.
3.
Remove the
'0'
ring.
4.
Extract the oil seal.
Reassembling
5.
Press a new oil seal into the housing.
6.
Refit the
'0'
ring.
7.
Refit the pinion.
R.
Refit the pinion assembly 37.25.09.
37.25.09
37.25.15
Triumph TR6 Manual. Part No. 545277 Issue 1