Table of Contents
Advertisement
ELECTRICAL
SWITCHES
Refitting
5.
Reverse instructions I to 4. Connect the three Lucar
connectors as shown in data 86.65.00.
Removing
I.
Isolate the battery.
2.
Right hand steer vehicles only:-
Remove single screw and washer and withdraw the
gearbox cover side trim panel on the drivers side of
the vehicle to release the harness.
3.
Remove two screws and spring washers.
4.
Disconnect three Lucar connectors.
Refitting
7.
Reverse instructions I to 6.
Removing
I.
Isolate the battery.
2.
Pull off the panel rheostat knob.
3.
Remove single screw and washer and withdraw the
gearbox cover side trim panel on the passenger side of
the vehicle.
4.
Note the wire positions by colour code.
5.
Disconnect two Lucar connectors.
6.
Using a suitable tool unscrew the bezel. Withdraw the
switch from the bracket.
- Dip switch - remove and refit
SWITCHES
- Panel rheostat - remove and refit
86.65.11
86.65.12
86.65.1 I
86.65.12
Triumph TR6 Manual. Part No. 545277 Issue I
Hide quick links:
Advertisement
Table of Contents
