Triumph TR6 PI Operation Manual page 37

MAINTENANCE
(22) Clean engine oil filler cap
1.
Remove filler cap.
2. Clean cap with clean petrol.
3. Allow to dry.
4. Refit filler cap.
(23) Clean carburetter air cleaner elements
See 19.10.08
(24) Renew carburetter air cleaner elements
See 19.10.08
(25) Check/adjust/report condition of driving belts
1. Check and adjust - See 26.20.01
2. Report condition where belt is visibly
(a) worn or
(b)
damaged.
(26) Check security of starter motor and alternator
retaining bolts
I. Check security of starter motor retaining bolts, which
if correct should be tightened to 26 to 34 lbf ft (3·6
to 4·7 kgf m).
2. Check security of alternator to adjusting link bolt,
which if correct should be tightened to IS to 20 Ibf ft
(2·1 to 2·8 kgf m).
3. Check security of alternator mounting bracket bolt,
which if correct should be tightened to 16 to 22 lbf ft
(2·2 to 3'0 kgf m).
(27) Check security of engine mountings
I. Check security of front engine mountings, which if
correct should be tightened to 24 to 32 lbf ft (3·3 to
4-4 kgfm).
2. Check security of rear engine mountings, which if
correct should be tightened to 50 to 60 lbf ft (6·9 to
9·0 kgf m). Mounting rubber to gearbox AND 38 to
46 Ibf ft (5·2 to 6-4 kgf m) mounting rubber to cross
member.
10.00.12
~2b~~
20 . . .
----......
. "
~
NT247Q
friumph TR6 Manual. Part
N~).
545277 Jssue
J