Triumph TR6 PI Operation Manual page 113

c.
Check the clearance between the outer rotor
and the body. See Data.
9. Examine the cover plate for scoring and test on a
surface plate for distortion.
10. Reassemble the pump fitting any new parts necessary
to satisfy the above quoted tolerances. Renew any
components that are unsatisfactory due to pitting,
scoring or corrosion.
CAUTION: The inner rotor and spindle and the outer rotor
are supplied only as an assembly and under no
circumstances must they be separated and fitted as
individual replacements to a worn pump.
11. Refit the oil pick-up strainer 12.60.20.
12. Refit the pump to the crankcase instructions 5 and 6,
12.60.26.
DATA
Pump capaCity (approx.)
Maximum clearance between
outer rotor and pump body
Maximum clearance between
.outer and inner rotors
Maximum clearance between
the cover plate and rotors
(end clearance)
Triumph TR6 Manual. Part No. 545277 Issue J
ENGINE
3'00 GP/min at 1000 r.p.m. using
SAE 30 oil at 80°C
0'010 (0'254 mm)
0'001 - 0'004 (0'0254 - 0'102 mm)
0'004 (0'102 mm)
12.60.32 Sheet 2