Triumph TR6 PI Operation Manual page 349

FRONT SUSPENSION
Refitting
5. Reverse instructions 1 to 4.
Removing
1. Remove the front road spring 60.20.01.
2. Remove the four nuts and plain washers securing the
lower Wishbone brackets to the chassis.
3. Withdraw the lower Wishbone arms complete With
mounting brackets and shims.
4. Remove the nuts and bolts securing the Wishbone
arms to the mounting brackets and remove the
brackets.
1. Remove the upper wishbone 60.35.01.
2. Remove the rubber bushes (4) from the wishbone
arms.
Assembling
3. Fit new rubber bushes (4) to the wishbone arms.
4. Fit the Wishbone arms, plain washers and slotted nuts
to the fulcrum pin.
5. Tighten the slotted nuts and secure with new split
pins.
6. Fit the fulcrum bracket and wishbone to the car
60.35.01.
1. Remove the lower wishbone arms from the car
60.35.02.
2. Press out the rubber bushes.
3. Press in new bushes ensuring they are centred in the
Wishbone arms.
4. Fit the Wishbone arms to the car 60.35.02.
LOWER WISHBONE
- Remove and refit
UPPER WISHBONE
- Overhaul
LOWER WISHBONE
- Overhaul
60.35.02
60.35.08
60.35.09.
NT:M32
NT2432
60.35.02
60.35.09
Triumph TR6 Manual. Part No. 545277 Issue]