Triumph TR6 PI Operation Manual page 42

(43) Lubricate all grease points except hubs
Suspension upper ball joint
1. Wipe clean the sealing plug and surrounding area
2. Remove plug and fit a suitable grease nipple.
3. Apply a grease gun until grease exudes from the joint.
4. Remove grease nipple and replace sealing plug.
5. Wipe away surplus grease.
Inner drive shaft universal joint
1. Wipe clean the grease nipple and surrounding area.
2. Apply a grease gun and give 5 STROKES ONLY.
3. Wipe away surplus grease.
(44) Lubricate steering rack and pinion
1. Wipe clean the plug and surrounding area.
2. Remove the plug.
3. Fit a suitable grease nipple to the plug hole.
4. Apply a grease gun to nipple and stroke for 5 times
only.
CAUTION: Over greasing can cause damage to the
rubber bellows.
5. Remove grease nipple.
6. Refit plug.
7. Wipe away surplus grease.
(45) Lubricate handbrake linkage and cables
1. Lubricate handbrake pivot.
2. Smear grease around handbrake lever cable
connections, working it well into the clevis pin.
3. Smear grease around brake drum cable connections,
working it well into the clevis pin.
4. Grease exposed sections of inner cable to resist
corrosion.
MAINTENANCE
I.
IL
3
MT281SS
~
~
Triumph TRh l\h1nui.l1. PUrl Nll. 545~77 Issue I
10.00.17