Triumph TR6 PI Operation Manual page 64

II. Check the piston ring gaps when inserted squarely
into the bores - see data.
12. Using special tool S335 and adaptor arbor S336-4,
check the connecting rods for
a) bend and
b) twist-
see data. Rods that exceed the tolerances in both
conditions should be re-aligned or renewed.
13. Check the gudgeon pm bush in the connecting rods
for wear and if necessary remove the old bush and fit
a new one using a suitable hand press. Ensure that the
oil hole in the bush corresponds with the hole in the
connecting rod. Ream the new bush to size - see
Data.
Continued
Triumph TR6 Manual. Part No. $45277 Issue 1
ENGINE
o
\f~
, - \
.~
~"',
/
\
.~
\ \ \ NT2755
12.17.13 Sheet 2