Triumph TR6 PI Operation Manual page 114

ENGINE
OIL SUMP
(
- Remove and refit
12.60.44
/
'~
Removing
1. Place the car on a ramp.
2. Isolate the battery.
3. Remove the drain plug and drain the oil.
NOTE: The illustration shows the position of the drain plug
on earlier engines.
On later engines the plug is situated to the rear left
hand side of the sump.
4. Remove the twenty three bolts and spring washers
and withdraw the sump.
Refitting
5.
6.
7.
CleaR' the sump inside and out and remove all traces
of old gasket from the sump and crankcase mating
faces.
Place a nev, gasket in position and offer up the sump
to the crankcase and secure it with the bolts and
washers, noting that the four longest bolts fit at the
rear through the reinforced plates.
Refit the drain plug and refill the sump with a
recommended grade of oil and check for leaks.
(~'\
,O.-'_~I
,-
NT2 677
12.60.44
~LoT.'SN"D
Triumph TR6 Manual. P<.lrt No. 545277 Issue 2
1Z1