Triumph TR6 PI Operation Manual page 242

52. Refit the retaining plate, secure with cross recessed
head screw.
*.
53. Apply jointing compound to the front cover plate
gasket, fit the plate and gasket and secure with two
screws and copper washers.
*.
54. Refit the mainshaft rear thrust washer and locate the
rear extension and gasket (if overdrive is to be fitted
refit the adaptor plate and cam and continue from
59).
55. Secure the rear extension, six bolts.
56. Refit the drive flange.
57. Fit the washer and tighten the nut to a torque load of
90 to 110 Ibf ft (12·4 to 15·2 kgf m) using tool No.
R421 to retain the flange.
58. Refit the speedometer drive pinion assembly and
secure with the peg bolt.
59. Refit the front bearing plate and gasket - 4
setscrews.
60. Refit the clutch release mechanism 33.25.12.
61. Refit the top cover assembly and gasket - se~ure
with eight bolts.
62. Refit the gearbox.
Triumph TR6 Manual. Part No. 545277 Issue 2
SYNCHROMESH GEARBOX
NT28888
37.20.04 Sheet 6