Triumph TR6 PI Operation Manual page 420

WINDSCREEN WIPERS AND WASHERS
Removing
1. Uft the wiper arm and blade from the screen so that
it falls into its service position.
2. Position a screwdriver as shown and impart a twisting
action to lift the clip from the spindle groove.
3. The assembly may now be removed by hand.
Refitting
4. Ensure that the spindles are in the 'park' position.
5. Hinge the wiper arm against the spring to adopt its
service position.
6. Locate the splines for a suitable 'park' position. Pus)J.
on to engage the clip to the spindle groove.
7. Lower the wiper arm to the screen.
Refitting
3. Locate the cage and clip assembly to the wiper arm.
Push on to engage 'pip'.
4. Lower the wiper arm to the screen.
Removing
1. Uft the wiper arm and blade from the screen so that
it falls into its service position.
2. Simultaneously lift the clip 'A', tilt cage 'B' and
gently pull the wiper blade from the arm.
WINDSCREEN WIPER ARM
- Remove and refit
WINSCREEN WIPER BLADE
- Remove and refit
84.15.01
84.15.05
84.15.01
84.15.05
Triumph TR6 ManuaL Pan No. 545277 Issue 1