Triumph TR6 PI Operation Manual page 373

Refitting
9. Engage the hooks of the upper and lower return
springs in the secondary brake shoe and offer up to
the backplate. Do not fit the shoe to either the wheel
cylinder or brake adjuster.
10. Engage return springs in the leading shoe.
11. Fit the leading shoe in position in the wheel cylinder
and adjuster.
12. Fit the trailing shoe to the wheel cylinder and
adjuster.
13. Check both return springs to ensure that hook ends
are properly engaged in the shoes.
14. Fit the shoe-steady pins and springs. Note that the
opel\ end of the springs should lead in the direction
of wheel rotation. See illustration for correct
positions of brake shoes and shoe-steady springs.
15. Fit the brake drum. Fit the hub extension (wire
wheels only).
16. Adjust the
~rake.
17. Fit the road wheel and remove the jack.
BRAKES
Refitting
4. Reverse instructions 1 to 3.
Removing
1. Jack up the car and remove the road wheel.
2. Release the handbrake and remove the brake drum
and brake shoes 70.40.03.
3. Remove the two nuts and spring washers securing the
adjuster to the backplate and withdraw the adjuster.
REAR BRAKE ADJUSTER
- Remove and refit 70.40.17
IJ ~
~
Triumph TR6 Manual. Part No. 545277 Issue
".VLAND
Sheet 2 70040.03
70.40.17