Triumph TR6 PI Operation Manual page 423

Dismantle
12. Perform 84.15.12 instructions 2 to 6.
13. Remove the final gear shaft spring .clip by
withdrawing sideways. Remove the washer. Ensure
that the shaft is burr free and withdraw it. Remove
the dished washer.
14. Remove the through bolts.
15. Carefully withdraw the cover and armature about
0'200 in (5 mm). Continue withdrawal allowing the
brushes to drop clear of the commutator. Ensure that
the brushes are not contaminated with grease.
16. Pull the armature from the cover against the action of
the permanent magnet.
17. Remove five screws to release the brush assembly and
limit switch unit. Remove both units joined together
by the wires.
WINDSCREEN WIPERS AND WASHERS
NT0701
~
~
Triumph TR6 Manual. Part No. 545277 Issue 1
84.15.18 Sheet 2