Triumph TR6 PI Operation Manual page 199

FUEL SYSTEM - TC
I. Remove the centre bolt and washer.
2. Remove the cover.
3. Remove the cover washer.
4. Remove the gauge ftlter and wash in petrol.
5. Loosen any sediment in the pump body and remove
with compressed air. Avoid damage to the non-return
valves.
6. Refit the gauze ftlter.
7. Refit the cover with a new cover washer and centre
bolt washer.
Do
not overtighten the bolt.
FUEL PUMP
- Clean filter
FUEL PUMP
- Remove and refit
19.45.05
19.45.08
Removing
1. Disconnect the main fuel supply pipe from the pump
inlet connection..
2. Disconnect the pipe from the pump outlet.
3. Remove the two nuts and spring washers securing the
pump to the cylinder block.
4. Remove the gasket.
Refitting
5. Clean the cylinder block and pump mating faces and
fit a new gasket.
6. Reverse instructions 1 to 3 ensuring that the pump
rocker arm is located correctly against the camshaft -
before tightening the attachment nuts.
19.45.05C
19.45.08C
NT 2131
IJ ~
Triumph TR6 Manual. Pan No. 545277 Issue I
~
I.aVL._