Triumph TR6 PI Operation Manual page 88

ENGINE
PUSH RODS
- Remove and refit
12.29.59
Removing
1. Remove the rocker cover 12.29.42.
2. Remove the rocker shaft assembly 12.29.54.
3. Lift out the push rods and identify for reassembly.
Refitting
4. Reverse instructions I to 3 ensuring:-
Q.
Push rods with worn or pitted cup and ball ends
and bent shaft are renewed.
b.
The cup ends are located correctly in the rocker
adjusting sc.ew ball and the ball end of the
push rods seat properly in their respective cam
followers.
5. Adjust the valve clearances 12.29.48
Valves - exhaust - remove and refit
Valves inlet and exhaust - remove and refit
Valves - inlet - remove and refit
Valve guide - inlet - remove and refit
Valve guide
~
exhaust - remove and refit
Inlet valve seat - remove and refit
Exhaust va\ 1e seat - remove and refit
See 12.29.18.
12.29.59
12.29.77
12.29.60
12.29.62
12.29.63
12.29.70
12.29.71
12.29.76
12.29.77
Triumph TR6 Manuala Part No. 545277 Issue 1