Triumph TR6 PI Operation Manual page 477

Table of Contents

Advertisement

ELECfRICAL
LAMPS
Removing
1.
Isolate the battery.
2.
Remove single screw and washer and withdraw the
gearbox cover side trim panel on the passenger side of
the vehicle.
3.
Pull out the bulb holder from the projection of the
'FASTEN BELTS' unit.
4.
If required remove the bulb from the bayonet fitting.
5.
Push out the 'FASTEN BELTS' unit from the fascia.
- Seat belt -
warning
light - remove and refit
Later U..>.A. market vehicles only.
86.45.75
Refitting
6.
Reverse instructions 1 to 5.
NTO 773
LAMPS
Left hand steer vehicles only.
- Brake line failure warning light - remove and refit
86.45.77
Refitting
6.
Reverse instructions I to 5.
86.45.76
- Hazard warning light - remove and refit
Removing
1.
Isolate the battery.
2.
To gain access remove either the speedometer
88.30.01 or the tachometer 88.30.21. The choice
depends entirely on which operation is prefered by
the individual fitter.
3.
Pull out the bulb holder from the housing.
4.
If required unscrew the bulb from the holder.
5.
Unscrew the lens bezel from the housing.
86.45.75
86.45.77
Triumph TR6 Manual. Part No. 545277 Issue I

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tr6 tc

Table of Contents