Triumph TR6 PI Operation Manual page 375

Refitting
5. Reverse instructions 2 to 4.
6. Bleed the brakes.
Removing
1. Jack up the car and remove the front wheel.
2. Disconnect the front caliper brake pipe union at the
flexible hose.
3. Remove the two bolts and spring washers securing the
caliper to the mounting disc.
4. Withdraw the caliper.
Reassembling
7. Carefully install new seals in the cylinder bores and
lubricate the bores with clean brake fluid.
8. Fit the pistons to the caliper.
9. Fit new dust covers and circlips.
10. Fit the caliper to the car 70.55.02.
11. Fit the brake pads and shims 70.40.01.
12. Bleed the brakes.
Dismantling
I. Remove the caliper.70.55.02
2. Remove the brake pads and shims 70.40.01.
3. Remove the circlip retaining the piston dust covers
and withdraw the dust covers.
4. Extract the caliper pistons. Piston removal may be
effected using a low pressure air line. Do not
interchange the pistons.
5. Prise out the cylinder seals taking care not to damage
the cylinder bore.
6. Thoroughly clean the caliper and pistons.
FRONT CALIPER
- Remove and refit
FRONT CALIPER
- Renew seals
70.55.02
70.55.13
BRAKES
Triumph TR6 Manual. Pan No. 545277 Issue I
70.55.02
70.55.13