Triumph TR6 PI Operation Manual page 293

OVERDRIVE-J TYPE
33. Check the ball race and ensure that
it
rotates
smootWy as this can be a source of noise when
running in direct drive.
34. Examine the clutch return springs for any signs of
distortion or collapse.
35. Inspect the sun wheel teeth for wear or damage.
36. Inspect the planet gears for damage or wear.
37. Check the planet gear bearings for any excessive
clearance.
38. Examine the oil thrower for damage.
39. Using a screwdriver blade, remove the circlip.
40.
un
out the oil thrower.
41. Place tool LI 78 over the exposed uni-directional
roller clutch.
42.
un
the inner member complete with rollers into the
special tool.
43. Remove the bronze thrust washer.
44. Remove the speedometer drive bolt.
45. Remove the speedometer driven gear clamp.
46.
Pull
the speedometer driven gear out with a pair of
pliers; tllls will also remove the speedometer bush.
continued
NT0361
4O.20.IOJ Sheet 2
Triumph TR6 Manual. Part No. 545277 Issue I
II