Triumph TR6 PI Operation Manual page 397

BODY
DOOR GLASS
5
7. Reverse instructions I to 6.
Refitting
Removing
1. Remove the door trim pad 76J4.01.
2. Remove the door glass regulator 76.31.45.
3. Remove the two bolts and washers and push the glass
stop to one side.
4. Fully lower the glass.
5. Detach the inner and outer door waist seals from the
clips.
6. Carefully lift out the glass.
-NOTE: Avoid scratching the glass on the seal clips dUring
removal.
76.31.01
- Remove and refit
Refitting
7. Reverse instructions I to 6.
Removing
I. Remove the door trim pad.76.34.01.
2. Loosely refit the window winder handle and move
the glass to the half open position.
3. Remove the three bolts and washers securing the
bracket to the door.
4. Remove the four bolts and washers securing the
mechanism to the door.
5. Support the glass and slide the regulator to release the
studs from the glass lifting channel.
6. Withdraw the regulator from the door.
DOOR GLASS REGULATOR
- Remove and refit 76.31.45
~/
~------
~
lZ1
Triumph TR6 Manual. Part No. 545277 Issue I
76.31.01
76.31.45