Table of Contents
Advertisement
MAINTENANCE
NOTE:
OPERATIONS 40 to
52 ARE BEST
CARRIED OUT WITH THE CAR ON A RAMP OR
OVER A PIT.
(40) Check/top up level of gearbox and overdrive oil
With vehicle standing level
I.
Wipe clean gearbox filler plug and surrounding area.
2.
Remove filler plug.
3.
Add new oil of the recommended grade, via the filler
plug hole, until the oil level reaches the bottom of the
hole.
4.
Allow surplus oil to drain.
s.
Replace filler plug.
6.
Tighten plug to 20 to 25 lbf ft (2·8 to 3·5 kgf m).
7.
Wipe away surplus oil.
(41) Check/top up level of final drive unit oil
With vehicle standing level
I.
Wipe clean final drive unit filler plug and surrounding
area.
2.
Remove filler plug.
3.
Add new oil of the recommended grade, via the filler
plug hole, until the oil level reaches the bottom of the
hole.
4.
Allow surplus oil to drain.
S.
Replace filler plug.
6.
Tighten plug to 20 to 25 lbf ft (2·8 to 3'5 kgf m).
7.
Wipe away surplus oil.
(42) Lubricate lower steering swivel
WARNING: OIL must be used for the operation. Do
NOT use grease.
I.
Wipe clean the plug and surrounding area.
2.
Remove the plug.
3.
Fit a suitable grease nipple to the plug hole.
4.
Using
a
grease
gun,
CHARGED
WITH
A
RECOMMENDED OIL, lubricate the lower steering
swivel, via the grease nipple, until oil exudes from the
bearing.
5.
Remove grease nipple
6.
Refit plug.
7.
Wipe away surplus oil.
10.00.16
,
~
..
\
\
\
NT2475
Triumph TR6 Manual. PiJr( No. 545:!77 JssuC' I
NT2471
\
Hide quick links:
Advertisement
Table of Contents
