Triumph TR6 PI Operation Manual page 231

SYNCHROMESH GEARBOX
9
NT0833A
. ~
//
/
16
37.12.19
1. Remove the top cover 37.12.16
- Overhaul
Dismantling
2. Remove the reverse lamp switch and overdrive
isolator switches (if fitted).
3. Remove the screwed plug, distance piece, spring and
plunger - reverse detent.
4. Remove the screwed plug, spring and steel ball
3rd/top detent.
5. Remove the screwed plug, spring and steel ball
Ist/2nd detent.
6. Remove three "wedglok" bolts - one from each
selector shaft.
7. Move the three selector shafts into their neutral
positions.
8. Withdraw the Ist/2nd selector shaft. .
9. Remove the Ist/2ntl selector fork and distance tube.
10. Withdraw the reverse selector shaft
II. Remove the reverse actuator and distance tube.
12. Withdraw the 3rd/top selector shaft.
13. Remove the 3rd/top selector fork and distance tube.
14. Remove the interlock plunger and interlock balls.
IS. Unscrew two setscrews and remove the cover plate.
16. Remove the sealing rings.
TOP COVER
37.12.19 Sheet I
Triumph TR6 Manual. Part No. 545277 Issue I