Triumph TR6 PI Operation Manual page 245

SYNCHROMESH GEARBOX
CONSTANT PINION ASSEMBLY
I. Remove the constant pinion assembly 37.20.04 (I -
18).
Dismantling
2. Remove the mainshaft spigot bearing.
3. Remove the circlip and washer.
4. Remove the snap ring.
5. Using tool No. S422IA·ISA, withdraw the bearing.
6. Remove the oil thrower.
Reassembling
7. Fit the oil thrower over the shaft.
8. Using tool No. S422IA·ISA fit the bearing ensuring
that the oil thrower is centralised.
9. Fit the washer and a new circlip.
10. Refit the snap ring.
II. Refit the mainshaft spigot bearing.
12. Refit the constant pinion assembly 37.20.04 (48 -
62).
37.20.54
-Overhaul
- Service tool S4221A - ISA.
37.20.54
Triumph TR6 Manual. Pan No. 545277 Issue I