Triumph TR6 PI Operation Manual page 296

81. Fit the ball race into its housing.
82. Secure the ball race with the large circli'p.
83. Position this assembly onto the hub of the cone
clutch.
84. Secure with a circlip.
85. Ensure that the circlip locates properly in the groove.
86. Insert the sun wheel into the hub.
87. Fit the circlip on the sun wheel extension.
88. Lightly smear th.e operating pistons with oil.
89. Fit the pistons into their respective housings.
90. Refit the solenoid control valve. 40.22.09.
91. Refit the pressure filter. 40.1 0.08.
92. Refit the oil pump assembly. 40.18.01.
93. Refit the pump non-return valve assembly 40.16.10.
94. Refit the reiief valve assembly. 40.16.04.
continued
I~I
Triumph TR6 Manual. Part No. 545277 Issue I
OVERDRlVE-J TYPE
4O.20.IOJ
Sheet 5