Table of Contents
Advertisement
COLD START LINKAGE
- Remove and refit
Remove
(From Engine No. CRIE)
19.20.07
FUEL SYSTEM PI
1.
Remove the air intake manifold. 19.70.01
2.
Disconnect the cold start cable from the manifold
linkage.
3.
Disconnect the cold start cam return spring.
4.
Remove the two bolts, plain and spring washers
securing the linkage to the manifold.
5.
Lift
off the linkage.
Refitting
6.
Reverse instructions 3 to 5.
7.
Ensure that the cold start cam is against its stop.
8.
Start the engine and warm to the normal operating
temperature.
9.
Slacken the locknut and turn the cam to the fully
open position.
10.
Adjust the screw until a fast idle speed of 1500
~
1800 r.p.m. is attained.
11.
Reconnect and adjust the cold start cable.
12.
Refit the air intake manifold.
Triumph TR6 Manual. Part No. 545277 Issue I
9
19.20.27 P.I.
Hide quick links:
Advertisement
Table of Contents
