Triumph TR6 PI Operation Manual page 139

1. Start the engine and warm to the normal operating
temperature.
2. Remove the air intake manifold 19.70.01.
3. Check that the throttle cable is correctly adjusted.
4. Ensure that the cold start lever on the metering unit
is back against its stop and that there is clearance
between the cam and adjusting screw on the 'manifold
linkage.
5. Screw in the front adjuster until the centre pair of
butterflies are just opening and the front pair are just
closing. Back off the adjuster until the centre
butterflies just close.
6. Screw in the rear adjuster until the rear pair of
butterflies are just opening and the centre pair are
just closing. Back off the adjuster until the rear
butterflies just close.
THROTTLE BUTTERFLIES
(From Engine
No.
CR IE)
- Check and adjust
19.20.05
FUEL SYSTEM PI
I~I
Triumph TR6 Manual. Part No. 545277 Issue I
19.20.05 P.I. Sheet 5