Triumph TR6 PI Operation Manual page 407

BODY
SEAT RUNNERS
Refitting
4. Reverse instructions I to 3. Adjust the catch plates if
necessary, to ensure correct engagement of the seat
squab catch.
- Remove and refit
Removing
I. Remove the seat 76.70.04/05.
2. Remove the four bolts and washers.
3. Remove the seat runners.
76.70.21
2
NT2.ao
SEAT SQUAB CATCH
SEAT BELTS·- STATIC (EXCEPT U.S.A. MODELS)
The seat squab catch is secured to the seat frame by
four screws, spring washers and plain washers.
Removing
I. Disconnect the seat belts from the
l100r
and 'B' post
mountings.
2.. Remove the eye bolts and plain washers.
3. Remove the two bolts, spring washers and spacers
securing the swivel bracket
ti)
the wheelarch.
76.70.27
76.73.02
- Remove and refit
- Remove and refit
Refitting
4. i<everse instructions 1 to 3, ensuring thai the swivel
bracket is left free to swivel,
Refitting
6. Reverse instructions I to 5, ensuri'lg that the swivel
brackets are left free to swivel.
Removing
I . Isolate the battery.
2. Remove the buckle unit. 86.65.31/2.
3. Remove the bolt securing the swivel bracket to the
'B' post.
4. Remove the cap, bolt, plain washer, cover and spacer
securing the swivel bracket to the wheelarch.
5. Remove the bolt securing the reel to the body.
SEAT BELTS - AUTOMATIC (U.S.A. MODELS)
- Remove and refit
76.73.10
i
\
\
\-
~1;\}\
( ! ~_.--..---
.'l
i
v
/ / .........
~:.-
;r--1I
.......
Triumph TR6 Manual. Part No. 545277 Issue I
76.70.21
76.73.10