Triumph TR6 PI Operation Manual page 124

EMISSION CONTROL
ADSORPTION CANISTER AIR FILTER
- Pre 1973 Cars only
WARNING: Because of the possible presence of fuel fumes,
avoid naked lights or actions likely to cause sparks.
Refitting
5. Fit the new fIlter into body of canister.
6. Reverse I to 3 ensuring that the canister pipes are still
in position and that they present leak free joints.
Removing
1. Remove the nut and screw on the canister securing
strap.
2. Lift the canister clear of the bracket.
3. Unscrew the base of the canister and lift out the
fIlter.
4. Clean any carbon particles from the base of the
canister.
K249
3
17.15.07 - Remove and refit
WARNING: Because of the posible presence offuel fumes,
avoid naked lights or action likely to cause sparks.
Refitting
4. Reverse instructions 1 to 3 ensuring that all
connections are leak free.
Removing
I. Disconnect the two pipes into the top of the canister.
lao 1973 vehicles - disconnect the three pipes into the
top and one pipe from the bottom.
2. Remove the nut and screw on the canister securing
strap.
3. Remove. the canister.
17.15.13 - Remove and refit
ADSORPTION CANISTER
I7 .15.07
17.15.13
Triumph TR6 Manual. Pan No. 545277 Issue I
~
kZJ