Triumph TR6 PI Operation Manual page 193

FUEL SYSTEM - TC
Removing
1. Remove the four screws securing the top cover to the
carburetter body.
2. Lift off the top cover.
3. Remove the diaphragm spring.
4. Remove the diaphragm retaining plate.
5. Remove the diaphragm.
Refitting
6. Fit the diaphragm, locating the inner tag in the air
valve recess.
7.
Fit the retaining plate and ensure the correct
diaphragm seating and tighten the screws.
8. Locate the diaphragm outer tag in the recess in the
carburetter body.
9. Fit the top cover and evenly tighten the screws.
DIAPHRAGM
- Remove and refit 19.15.35
- Remove and refit
Removing
TIlROTfLE PEDAL AND COUNTER SHAFT
19.20.01.
Working inside the car, pull back the carpet trim on
the R.H. side of the bulkhead and remove the split
pin and washer.
Continued
1.
Ii
\ I NT1:443
19.IS.3SC
19.20.01C Sheet 1
Triumph TR6 Manual. Part No, 545277 Issue I