Triumph TR6 PI Operation Manual page 389

Refitting
5. Reverse instructions I to 4.
Removing
I. Raise and support the bonnet.
2. Remove the nut and washer securing the support stay
to the bonnet.
3.
Remove the eight bolts and washers securing the
bonnet to the hinges.
4. Lift off the bonnet.
I.
Slacken the eight bolts securing the hinges to the
bonnet.
2.
Adjust the bonnet fore and aft as required.
3. Retighten the bolts.
4.
Slacken the four bolts securing the hinges to the wing
valances.
5.
Adjust the bonnet front upwards or downwards as
required.
6. Retighten the bolts.
7.
Slacken the two locknuts and screw the rubber
buffers in or out to obtain correct height adjustment.
8.
Retighten the locknuts.
BONNET
- Remove and refit
BONNET
-Adjust
BONNET HINGES
- Remove and refit
76.16.01
76.16.02
76.16.12
1 . . //
/
..
/
!;
I
~~
-a/~~\
. .
1
BODY
NT 2462
Removing
I.
Remove the bonnet 76.16.01"
2.
Remove the two bolts and washers and lift off the
hinges.
Refitting
3. Reverse instructions 1 and 2.
Triumph TR6 Manual. Part No. 545277 Issue J
76.16.01
76.16.12