Triumph TR6 PI Operation Manual page 174

Removing
I.
Isolate the battery.
2. Remove the fuel metering distributor 19.35.07.
3. Remove the banjo bolt.
4. Remove the two '0' rings from the banjo connector.
Refitting
5. Reverse instructions 1 to 4 ensuring:-
a)
New '0' rings are fitted if origonals are faulty.
b) Absolute cleanliness is observed.
c) A kinke!l pipe is renewed 19.60.24
d) The banjo bolts are tightened to 150 to 200 Ib
ins.
Same as 19.60.15 except that for access to the union
on the metering distributor number three pipe union
on the distributor must be disconnected.
INJECTOR PIPE NUMBER TWO
- Remove and refit
INJECTOR PIPE NUMBER THREE
- Remove and refit
Same as 19.60.15.
INJECTOR PIPE NUMBER FOUR
-'- Remove and refit
INJECTOR PIPE NUMBER FIVE
- Remove and refit
Same as 19.60.16
INJECTOR PIPE NUMBER SIX
- Remove and refit
Same as 19.60.15
Triumph TR6 Manual. Pan No. 545277 Issue 1
19.60.16
19.60.17
19.60.18
19.60.19
19.60.20
FUEL SYSTEM - PI
19.60.16 P.I.
19.60.20 P.I.
'.~'.
'
.
.~
.
""",
. .
'
".
-",:,.,,-,