Table of Contents
Advertisement
Removing
I.
Isolate the battery.
2.
Perform 84.15.24 operations 1 to 5.
3.
To improve access remove the air inlet vent 76.15.17.
4.
To improve access remove the drivers seat 76.70.04
or the passengers seat 76.70.05 as required.
5.
Drivers side only -
Remove the tachometer 88.30.21.
6.
Passengers side only -
Remove the cubby box 76.52.03 and the demister
duct 80.15.03.
7.
Remove four screws. Break the seal and remove the
access plate.
8.
Left hand side only -
Remove two nuts and remove
the wheelbox
backplate.
9.
Right hand side only -
Action to prevent losing the short tubing in the
plenum chamber. Slacken two nuts unequally as
shown just enough to push the wheelbox to wheelbox
tubing from position. Tighten two nuts to firmly trap
the short tubing.
10.
Remove the wheelbox spindle nut.
II.
Carefully break the seal between the rubber moulding
and vehicle body. Withdraw the rubber moulding.
Ensure that the plastic tube is not detached from the
metal pipe.
12.
Withdraw the wheelbox through the access aperture.
13.
Right hand side only-
Dismantle two nuts, wheelbox backplate, short
tubing and wheelbox.
14.
Remove the rigid tube from the wheelbox spindle.
NT0662
WINDSCREEN WIPER WHEELBOX
- Left hand - remove and refit
- Right hand - remove and refit
84.15.28
84.15.29
WINDSCREEN WIPERS AND WASHERS
Triumph TR6 Manual. Part No. 545277 Issue 1
84.1 5.28 Sheet I
84.15.29 Sheet 1
Hide quick links:
Advertisement
Table of Contents
