Triumph TR6 PI Operation Manual page 309

REAR AXLE
NT2796
~----I\
.....1----11
7. Drift out the cross shaft locking pin and the cross
shaft.
"S. Rotate the sun gears through 90° and extract the
planet gears and thrust washers.
9. Withdraw the sun gears and thrust washers.
10. Remove the locking wire from the pinion shaft.
I\. Using tool RG421 or S316 to hold the flange,
remove the castellated nut and washer. Withdraw
the flange.
**
NOTE: Earlier units are fitted with a nyloc nut, Later units
are fitted with a wired castellated nut.
**
Triumph TR6 Manual. Purt N0. 545277 Issue:2
51.25.19 Sheet 2