Table of Contents
Advertisement
INSTRUMENTS
AMMETER
6.
Reverse instructions I to 5.
Refitting
Removing
1.
Obtain access to the rear of the ammeter by reaching
over the gearbox cover side trim panel.
2.
Pull out the panel light bulb holder.
3.
Disconnect the three Lucar connectors.
4.
Remove the two knurled nuts, spring washers, and
clamp bracket.
5.
Withdraw the ammeter from the fascia.
88.10.01
- Remove and refit
VOLTAGE STABILISER
- Remove and refit
88.20.26
Removing
I.
Remove the speedometer 88.30.01.
2.
Remove one screw and lift off the voltage stabiliser.
Refitting
3.
Reverse instructions I and 2.
Removing
1.
Lower the veneered fascia to the service position.
Operation 76.46.01 instructions I to 6.
2.
Pull out the bulb holder.
3.
Unscrew the nut securing the oil pipe to the gauge.
4.
Remove the two knurled nuts, spring washers and
clamp bracket.
5.
Withdraw the gauge from the fasda.
OIL PRESSURE GAUGE
- Remove and refit
88.25.01
Refitting
6.
Reverse instructions I to S.
88.10.01
88.25.01
Triumph TR6 Manual. Part
No.
545277 Issue I
Hide quick links:
Advertisement
Table of Contents
