Table of Contents
Advertisement
ENGINE
OIL FILTER ELEMENT
- Remove and refit
12.60.02
Removing
1.
Isolate the battery.
2.
Place a suitable receptacle under the oil filter to
prevent oil leakage on to the floor.
3.
Unscrew the central securing bolt and withdraw the
filter assembly from the engine.
4.
Remove and discard the filter element.
S.
Remove the crankcase sealing ring.
Refitting
6.
Clean the filter body and renew the seals if necessary.
7.
Clean the crankcase and fit a new sealing ring.
8.
Insert a new filter element in the filter bQdy and
secure the assembly to the crankcase, tightening the
central bolt to 15 - 20 Ibfft (2·1 to 2·8 kgfm).
9.
Reconnect the battery, start the engine and check:
a.
for oil leaks from the filter
b.
the low oil pressure warning light on the
control panel goes out
c.
that the oil pressure gauge registers the normal
pressure.
NT2615
I.
Remove the sump 12.60.44.
2.
Slacken the lock nut.
3.
Unscrew the strainer from the pump cover plate.
OIL PICK-UP STRAINER
- Remove and refit
Removing
12.60.20
Continued
NT2 217
12.60.02
12.60.20 Sheet 1
Triumph TR6 Manual. Part No. 545277 Issue I
Hide quick links:
Advertisement
Table of Contents
