Triumph TR6 PI Operation Manual page 336

FRONT SUSPENSION
Refitting
7. Reverse instructions 1 to 6. Ensure that the anti-roll
bar is fitted centrally on the front crossmember.
Removing
1. Remove the nyloc nut and plain washer securing the
anti-roll bar link to the lower wishbone bracket and
detach the link from the bracket. Repeat on opposite
side of car.
2. Remove the four nuts and plain washers securing the
two 'U' bolts to the front crossmember.
3. Withdraw the 'U' bolts and brackets.
4. Withdraw the anti-roll bar.
5. Remove the nuts securing the lower end of the
anti-roll bar links to the anti-roll bar. Detach the link
and the rubber mountings, washers and distance
tubes.
6. Remove the anti·roll bar mounting bushes.
4
~·-t:~---6
60.10.01 - Remove and refit
ANTI·ROLL BAR
NT2227
Triumph TR6 Manual. Part No. 545277 Issue I
60.10.01
1/:.,-,