Table of Contents
Advertisement
COOLING SYSTEM
Removing
I.
Drain the cooling system.
2.
Remove the two bolts and spring washers securing the
thermostat elbow to the water pump housing and
withdraw the thermostat elbow.
3.
Withdraw the thermostat.
Refitting
4.
Clean the mating faces of the thermostat elbow and
water pump housing.
5.
Insert the thermostat in the water pump housing.
6.
Fit a new gasket and the thermostat elbow. Tighten
the two securing bolts.
7.
Fill the cooling system.
I.
Determine the opening temperature of the thermostat
stamped on the flange or base.
2.
Immerse the thermostat in water heated to the
opening temperature of the thermostat. Renew the
thermostat if it fails to open.
THERMOSTAT
- Remove and refit
THERMOSTAT
- Test
26.45.01
26.45.09
26.45.01
26.45.09
Triumph TR6 Manual. Part No. 545277 Issue
J
Hide quick links:
Advertisement
Table of Contents
