Table of Contents
Advertisement
BRAKES
Refitting
8.
Reverse instructions I to 7.
9.
Bleed the brakes.
Removing
I.
Remove the rear road wheel and brake drum
70.10.03.
2.
Remove brake shoes. 70.40.03 and disconnect the
handbrake cable at the backplate lever.
3.
Disconnect the drive shaft flange at differential.
4.
Disconnect the brake pipe at rear brake cylinder.
5.
Remove the six nuts securing the rear hub and
backplate to the trailing arm.
6.
Withdraw the rear hub complete with drive shaft.
7.
Withdraw the backplate.
REAR BRAKE BACK PLATE
- Remove and refit
FRONT HOSE
- Remove and refit
70.10.26
70.15.02/03
Removing
I.
Jack up the car and remove the front wheel.
2.
Disconnect the brake pipe union at hose/caliper
bracket.
3.
Disconnect the brake pipe union at the chassis
bracket.
4.
Remove the nuts and lockwashers securing the hose
ends to the caliper and chassis brackets.
5.
Remove the flexible hose.
Refitting
6.
Fit the hose ends to the caliper and chassis brackets
and secure with lockwashers and nuts. Ensure that
the hose is neither kinked nor twisted on installation.
7.
Fit the brake pipes to the hose ends.
8.
Fit the road wheel and remove the jack.
9.
Bleed the brakes.
70.10.26
70.15.03
Triumph TR6ManuaJ. Part No. 545277 Issue 1
Hide quick links:
Advertisement
Table of Contents
