Triumph TR6 PI Operation Manual page 87

Removing
1. Remove the cylinder head 12.29.10.
2. Lift out the eight cam followers and identify for
reassembly.
Refitting
3. Reverse instructions 1 and 2 ensuring:-
a. Worn or pitted cam followers are renewed.
b.
Each follower is free to slide .and rotate in its
respective bore.
ROCKER ADJUSTING SCREWS
- Remove and refit
Removing
1. Remove the rocker shaft assembly 12.29.54.
2. Remove the rocker adjusting screw locknuts.
3. Remove the rocker adjusting screws.
Refitting
4. Reverse instructions 1 to 3.
5. Adjust the valve clearances 12.29.48.
CAM FOLLOWERS
- Remove and refit
12.29.56
12.29.57
MT0786
ENGINE
l i D - - - 3
'\ NT2757
DATA
Cam follower dia.
Bore in cylinder block
0'799 in
~
0'80 in (20'31 - 20'12 mm)
0·8002 in - 0'8009 (20'325 - 20'343 mm)
~
~
Triumph TR6 Manual. Pan No. 545277 Issue 1
12.29.56
12.29.57