Triumph TR6 PI Operation Manual page 107

Refitting
6. Fit the spigot bush - instruction 3, 12.21.45.
7. Clean the crankshaft and flywheel mating faces and
fit the flywheel to the crankshaft ensuring that the
dowel in the crankshaft locates properly in the
flywheel.
8. Secure the flywh.:el with the four bolts and tighten
evenly to 50 -75lbfft (6·9 to 10"4 kgfm).
9. Using a dial gauge at dimension A from centre, check
the flywheel for run-out, see Data.
10.
Refit the clutch - instructions 4 to 7, 33.10.01.
II. Refit the gearbox. 37.20.01.
DATA
Flywheel run out not to exceed
Triumph TR6 Manual. Part No. 545277 Issue 1
ENGINE
L
_~_-l
/ <D 0
lJ
0·004 in (0·101 mm) at a radius of
4·0 in (101 mm) from the centre dimension A.
12.53.0'1 Sheet 2