Display Default-Configuration; Display Diagnostic-Information - H3C S5120-SI Series Command Reference Manual

<Sysname> display current-configuration | begin user-interface
user-interface aux 0
user-interface vty 0 15
authentication-mode none
user privilege level 3
#
return
# Display the current valid SNMP configuration on the device (the output information depends on the
device model and the current configuration).
<Sysname> display current-configuration | include snmp
snmp-agent
snmp-agent local-engineid 800063A203000FE240A1A6
snmp-agent community read public
snmp-agent community write private
snmp-agent sys-info version all

display default-configuration

Syntax
display default-configuration
View
Any view
Default Level
2: System level
Parameters
None
Description
Use the display default-configuration command to display the factory defaults of a device. The
command displays all commands to be executed when the device boots with the factory defaults.
Related commands: display current-configuration, display saved-configuration.
Examples
# Display the factory defaults of the device (The factory defaults vary with device models. The detailed
displays are omitted here).
<Sysname> display default-configuration

display diagnostic-information

Syntax
display diagnostic-information
1-10