Swlog Output Flash File-Size - Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual

swlog output flash file-size

Configures the size of the switch logging file.
swlog output flash file-size bytes
Syntax Definitions
bytes
Defaults
parameter
bytes
Platforms Supported
OmniSwitch 6250
Usage Guidelines
•
Use the ls command to determine the amount of available flash memory.
•
This command can also be used on the secondary CMM.
Examples
-> swlog output flash file size 400000
Release History
Release 6.6.1; command was introduced.
Related Commands
swlog clear
show log swlog
show swlog
MIB Objects
systemSwitchLoggingGroup
systemSwitchLoggingFileSize
page 45-8
The size of the switch logging file. The minimum value is 32000 while
the maximum value is the total amount of free space in flash memory.
default
128000
Clears the files that store switch logging data.
Displays stored switch logging information from flash.
Displays switch logging information.
OmniSwitch 6250 CLI Reference Guide
Switch Logging Commands
November 2009