Enable Stpd Rapid-Root-Failover - Extreme Networks ExtremeWare XOS Command Reference Manual

ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.

enable stpd rapid-root-failover

enable stpd rapid-root-failover
enable stpd <stpd_name> rapid-root-failover
Description
Enables rapid root failover for faster STP recovery times.
Syntax Description
stpd_name Specifies an STPD name on the switch.
Default
Disabled.
Usage Guidelines
This command is applicable for STPDs operating in 802.1D.
If you create an STPD with a unique name, the keyword is optional.
stpd
To view the status of rapid root failover on the switch, use the command. The
show stpd show stpd
command displays information about the STPD configuration on the switch including the enable/
disable state for rapid root failover.
Example
The following command enables rapid root fail over on STPD Backbone_st:
enable stpd backbone_st rapid-root-failover
History
This command was available in ExtremeWare XOS 10.1.
Platform Availability
This command is available on all platforms.
1219
ExtremeWare XOS 11.5 Command Reference Guide