NOTE:
7 In Advanced Virtual Disk Parameters, select one of the following options:
•
Use Recommended Settings
•
Customize Settings
8 Click Next.
9 In the Customize Advanced Virtual Disk Parameters window, select the
appropriate Virtual Disk I/O characteristics type.
10 Select one of the following options:
•
File system (typical)
•
Database
•
Multimedia
•
Custom
NOTE:
preferred RAID controller module ownership. For more information, see the
MD storage array documentation at support.dell.com/manuals.
11 Click Finish.
The virtual disks are created.
Creating a Host Group
To create a host group:
1 Launch the PowerVault MDSM and target the MD storage array you plan
to use for your NAS storage.
2 Select the Mappings tab.
3 In the Topology pane, select the storage array or the Default Group.
4 Perform one of the following actions:
•
Select Mappings and then Define Host Group.
•
Right-click the storage array or the Default Group, and select Define
Host Group from the pop-up menu.
5 Type the name of the new host group in Enter New Host Group Name
(for example, NX3500).
NOTE:
The virtual disk name should not exceed 30 characters.
If you select Custom, you must select an appropriate segment size and
Host group name must have alphanumeric characters.
Setting Up Your PowerVault NX3500 Solution
51