Clear Host; Clear Arp-Cache - Dell Force10 MXL Blade Reference Manual

clear arp-cache

Syntax
Parameters
Command Modes
Command
History

clear host

Syntax
Parameters
Command Modes
Command
History
292 | IPv4 Routing
Clear the dynamic ARP entries from a specific interface or optionally delete ( no-refresh ) ARP entries
from CAM.
clear arp-cache [ interface | ip ip-address ] [ no-refresh ]
interface
(OPTIONAL) Enter the following keywords and slot/port or number information:
•
•
•
•
•
ip ip-address (OPTIONAL) Enter the keyword ip followed by the IP address of the ARP entry
you wish to clear.
no-refresh
(OPTIONAL) Enter the keyword
Or use this option with
ARP entries you want to delete.
Note: Transit traffic may not be forwarded during the period when deleted
ARP entries are resolved again and re-installed in CAM. Use this option with
extreme caution.
EXEC Privilege
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
Remove one or all dynamically learnt host table entries.
clear host name
name
EXEC Privilege
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
For the Management interface, enter the keyword
followed by the slot/port information. The slot range is 0 and the port range is 0.
For a Port Channel interface, enter the keyword
number:
Range: 1 to 128
For a 10-Gigabit Ethernet interface, enter the keyword
followed by the slot/port information.
For a 40-Gigabit Ethernet interface, enter the keyword
the slot/port information.
For a VLAN, enter the keyword
interface
Enter the name of the host to delete.
Enter * to delete all host table entries.
ManagementEthernet
port-channel
TenGigabitEthernet
fortyGigE
vlan
followed by a number from 1 to 4094.
no-refresh
to delete the ARP entry from CAM.
or
ip ip-address
to specify which dynamic
followed by a
followed by