Telnet - Dell PowerEdge M420 Reference Manual

Syntax
show users [ long ]
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays a list of active users and the information
about them.
console#show users
Username
--------
Bob
John
Robert
Betty
show version
Use the show version command in User EXEC mode to displays the system
version information.
Syntax
unit
show version [
unit — The unit number.
•
Protocol
--------
Serial
SSH
HTTP

Telnet

]
Location
------------
172.16.0.1
172.16.0.8
172.16.1.7
System Management Commands
1585