show cut-through mode
Use the show cut-through mode command to show the cut-through mode on
the switch.
Syntax
show cut-through mode
Command Mode
Privileged EXEC
Default Configuration
This command has no default configuration.
User Guidelines
No specific guidelines.
Example
Console#show cut-through mode
Current mode
Configured mode : Disable (This mode is effective on
next reload)
show interfaces advanced firmware
Use the show interfaces advanced firmware command to display the firmware
revision of the PHY for a port.
Syntax
show interfaces advanced firmware
Parameter Description
Parameter
interface
1556
System Management Commands
: Enable
interface
Description
A 10G non-stacking physical interface.