Configuring Tagged Aggregated Ethernet Interfaces - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Complete Software Guide for Junos

Configuring Tagged Aggregated Ethernet Interfaces

Related
Documentation
1338
®
OS for EX Series Ethernet Switches, Release 10.4
On M120, M320, MX Series, T Series, and TX Matrix routers with Ethernet interfaces, the
valid range for
minimum-links number
specified, all configured links of a bundle must be up for the bundle to be labeled
On all other routers and on EX Series switches, other than EX8200 switches, the range
of valid values for
minimum-links number
specified, all configured links of a bundle must be up for the bundle to be labeled
On EX8200 switches, the range of valid values for
When the maximum value (12) is specified, all configured links of a bundle must be up
for the bundle to be labeled
If the number of links configured in an aggregated Ethernet interface is less than the
minimum link value configured under the
configuration commit fails and an error message is displayed.
To specify aggregated Ethernet interfaces, include the
[edit interfaces aex] hierarchy level:
[edit interfaces aex]
vlan-tagging;
You must also include the
vlan-id number;
You can include this statement at the following hierarchy levels:
[edit interfaces interface-name unit logical-unit-number]
[edit logical-systems logical-system-name interfaces interface-name unit
logical-unit-number]
For more information about the
Overview" on page 1254.
vlan-id
vlan-tagging on page 1427
is 1 through 16. When the maximum value (16) is
is 1 through 8. When the maximum value (8) is
minimum-links number
.
up
aggregated-ether-options
statement:
vlan-id
and
vlan-tagging vlan-id
is 1 through 12.
statement, the
statement at the
vlan-tagging
statements, see "802.1Q VLANs
Copyright © 2010, Juniper Networks, Inc.
.
up
.
up